Foam Tac RC Glue, 2 oz
The replacement for our Ultimate RC Foam Glue.
Beacon's FOAM TAC is very similar to URCFG. It glues Depron, EPP and other foam glues without melting the foam. FOAM TAC sets up quickly so you can keep working. FOAM TAC dries clear and flexible with a bond stronger than the foam itself. FOAM TAC has an even stronger bond with Carbon Fiber and servos than URCFG did.
Please Note: Glue must ship via ground. 48 contiguous states only! Please Select Parcel Post for all orders containing glue. This is due to postal regulations and all orders with glue must ship parcel post.
SUPER STRONG BOND
When used correctly FOAM TAC creates a super strong bond that is like welding foam. FOAM TAC has been tested with:
- DEPRON
- BLUECOR
- CELLFOAM
- EPP
- EPS (STYROFOAM)
IT'S NOT CA
FOAM TAC is not CA (cyanoacrylate) based. At the heart of the glue is a high quality resin that creates a permanent bond between the two surfaces. FOAM TAC:
- Won’t glue your fingers together.
- Won’t leave a white haze on the surface.
- Won‘t require kicker or accelerator.
- Won’t leave a brittle joint.
- Won’t foam up.
LESS IS MORE
Always dries clear Simply apply a thin amount of FOAM TAC to one side of the joint and gently press together. Pull the joint apart then press together again. That’s it. You don’t have to wait for the glue to get tacky. The glue sets in about 20 minutes and the bond will increase over time. The new 2oz bottle goes a long way, and at a lower price per ounce than other glues you can’t go wrong.
